What is the 2026 cost range for a aluminum casement scope window replacement in Seattle?

$14,063-$43,750, with the median landing near $28,907. The range reflects finish tier and layout complexity within the aluminum casement scope; the Seattle labor multiplier of 1.25× vs national median is baked in.

How long does a aluminum casement scope window replacement take in Seattle?

2-4 weeks of on-site construction for the aluminum casement scope, plus 8-18 weeks of permit review in Seattle if the scope requires a permit. Cosmetic-only refreshes often skip permits; anything touching plumbing, electrical, or structural does not.

What is the single biggest budget-overrun risk for this scope?

Condensation in cold climates — non-thermally-broken aluminum sweats heavily. Thermal-broken frames cost 40% more but eliminate the moisture issue.

Window replacement — Aluminum casement Cost in Seattle, 2026

Low

$14K

$14,063

Median

$29K

$28,907

High

$44K

$43,750

Scope timeline: 2-4 weeksSeattle permit window: 8-18 weeksUpdated 2026-04-24

Why aluminum casement × Seattle produces this band

A aluminum casement scope for a window replacement in Seattle combines two price levers: scope and metro labor rates. Aluminum casements are thin-framed, crank-out windows with tight seals — good airflow, modern aesthetic, often used in contemporary homes. Aluminum is strongest frame material but least thermally efficient unless thermally-broken. Against the national median remodel labor rate, Seattle runs 25% above the national median — so the aluminum casement band comes in 25% above the mid-range, then scales 25% above the national median on top of that. Permit timelines for residential work in Seattle typically run 8-18 weeks, which is the window you plan your design and decision sequence against. This page gives you the actual 2026 Seattle bands for this exact combination, plus the three cost drivers Baily asks about first when scoping the project live.

What drives cost for a aluminum casement scope

·Thermal break in the aluminum extrusion
·Hardware (European vs domestic)
·Glass size (casements allow larger uninterrupted glass)
·Custom colors

What makes Seattle different

Labor — WA LNI-licensed trades required on most work — contractor registration verifiable via online lookup.
Labor — Wet-season (Oct-Apr) labor premium for exterior trades (roofing, siding, decks).
Labor — Urban Forestry and tree-retention requirements add arborist labor on some remodels.
Material — Green building incentives favor FSC-certified lumber, heat-pump HVAC, and higher-R insulation — 5-10% material uplift for Energy Star targets.
Material — Port of Seattle is a primary entry for Asian-sourced finishes (tile, fixtures) — generally competitive.

Seattle rules that affect this scope

Seattle DCI runs SDCI plan review — typical residential turnaround 8-18 weeks depending on Land Use review.
Seattle Energy Code (SEC 2021) exceeds IECC — mandatory heat-pump water heater and HVAC on most new work.
Design Review required on most multi-family remodels above the small-project threshold.
Shoreline Management Act affects lakeside and riverside parcels (Lake Washington, Lake Union, Duwamish) — adds 8-14 weeks.

Scope your window replacement with Baily.

Baily asks the eight questions that determine where your project lands inside the $14K-$44K band for Seattle and hands the scoped brief to one licensed builder.

Loading chat…

Seattle remodel cost hub →Back to all cost guides →Ask Baily about your project →

Questions LA homeowners actually ask

$14,063-$43,750, with the median landing near $28,907. The range reflects finish tier and layout complexity within the aluminum casement scope; the Seattle labor multiplier of 1.25× vs national median is baked in.