What is the 2026 cost range for a single-story addition scope home addition in New York City?

$231,000-$528,000, with the median landing near $379,500. The range reflects finish tier and layout complexity within the single-story addition scope; the New York City labor multiplier of 1.65× vs national median is baked in.

How long does a single-story addition scope home addition take in New York City?

18-26 weeks of on-site construction for the single-story addition scope, plus 10-22 weeks of permit review in New York City if the scope requires a permit. Cosmetic-only refreshes often skip permits; anything touching plumbing, electrical, or structural does not.

What is the single biggest budget-overrun risk for this scope?

Matching old siding or brick — if the material is discontinued, the whole elevation has to be reclad. $8-20K unexpected if not scoped up front.

Home addition — Single-story addition Cost in New York City, 2026

Low

$231K

$231,000

Median

$380K

$379,500

High

$528K

$528,000

Scope timeline: 18-26 weeksNew York City permit window: 10-22 weeksUpdated 2026-04-24

Why single-story addition × New York City produces this band

A single-story addition scope for a home addition in New York City combines two price levers: scope and metro labor rates. Single-story additions extend the existing footprint at grade — new foundation section, roof tie-in, and framing that matches the existing structure. No structural work on the original house beyond the tie-in. Against the national median remodel labor rate, New York City runs 65% above the national median — so the single-story addition band comes in at the mid-range, then scales 65% above the national median on top of that. Permit timelines for residential work in New York City typically run 10-22 weeks, which is the window you plan your design and decision sequence against. This page gives you the actual 2026 New York City bands for this exact combination, plus the three cost drivers Baily asks about first when scoping the project live.

What drives cost for a single-story addition scope

·Foundation extension (slab or stem-wall to match existing)
·Roof tie-in flashing and structural connection
·Exterior siding match (often requires whole-elevation repaint)
·HVAC extension into the new zone

What makes New York City different

Labor — NYC DOB-licensed general contractors and plumbers carry the highest hourly rates in the U.S. (roughly 1.8× national median).
Labor — Union jurisdiction is strict — electrical work in most five-borough multi-family requires Local 3 IBEW.
Labor — Hoisting and delivery logistics add labor time on everything delivered above the 5th floor.
Material — Cabinet and stone slab delivery into Manhattan often requires after-hours crane crews — 15-25% uplift vs suburb.
Material — Dumpster and construction-debris permits are metered daily.

New York City rules that affect this scope

NYC DOB requires a Registered Design Professional (RA or PE) on permit submissions for most kitchen and bath work.
Co-op and condo alteration agreements typically require a 12-18% owner contribution for building-wide risk (separate from the NYC permit).
Local Law 152 gas-piping inspections affect any remodel touching gas lines.
Pre-war rent-stabilized units have separate tenant-protection filings that add 3-8 weeks to the alteration path.

Scope your home addition with Baily.

Baily asks the eight questions that determine where your project lands inside the $231K-$528K band for New York City and hands the scoped brief to one licensed builder.

Loading chat…

New York City remodel cost hub →Back to all cost guides →Ask Baily about your project →

Questions LA homeowners actually ask

$231,000-$528,000, with the median landing near $379,500. The range reflects finish tier and layout complexity within the single-story addition scope; the New York City labor multiplier of 1.65× vs national median is baked in.